Weighing; Weighing Units - Adam Equipment HIGHLAND SERIES Manual

4.4 WEIGHING
To determine the weight of a sample, first tare an empty container (if used), then
place the sample in the container. The display will show the weight of the sample
and the unit of weight currently in use. The stable indicator will light when the
reading is stable.
4.5 WEIGHING
To change the weighing units, press [Mode] to cycle through the options of units
that are enabled. See Parameters 6.1 Enabling Weighing Units, to enable or disable
the weighing units.
10 | P a g e
UNITS
© Adam Equipment Company 2008