Adam Equipment HIGHLAND SERIES Manual page 25

Data Format for normal weighing operations, parts counting or recalling of totals
from memory will all be different.
GS 123.45g GS for Gross Weight, NT for Net Weight and u for unit of weight
No. 1 This number increments every time a new value is stored in memory
Total 123.45g The total value stored in memory
<lf> Includes 2 line feeds
<lf>
Normal Output:
G S _ X X X
Input command format:
The scale can be controlled with the following commands. The commands must be
sent in upper case letters, i.e. "T" not "t".
T<cr><lf> Tares the scale to display the net weight. This is the same as pressing [Tare]
key.
Z<cr><If> Sets the zero point for all subsequent weighing. Display shows zero.
T5.345<cr><if> Would be same as entering a preset tare value of 5.345 from keypad
P<cr><lf> Prints the results to a PC or printer using the optional RS‐232 interface. It also
adds the value to the accumulation memory if the accumulation function is
not set to automatic.
25 | P a g e
.
X X u u u
© Adam Equipment Company 2008