Turn Signal Lever - Mitsubishi ECLIPSE 2011 User Manual

Features and controls
NOTE
Start adjusting when the knob is at the "0" position (when
the beam is at its highest).
Keep the knob in the "0" position except when using the
knob to lower the headlight beam angle.
Always return the knob to the "0" position when the bag-
gage is removed and the people have left the vehicle.
3
3-130

Turn signal lever

When changing lanes, or to making a gradual turn, hold the
lever in the "lane change" position (1). It will return to the neu-
tral position when you let go. Use the full position (2) when
making a normal turn. The lever will return to the neutral posi-
tion when the turn is complete. There may be times when the
lever does not return to the neutral position. This usually hap-
pens when the steering wheel is turned only slightly. You can
easily return the lever by hand.
I n f o r ma t i o n P r o v i d e d b y :
N00522600287