Mitsubishi ECLIPSE 2011 User Manual page 300

NOTE
When the temperature control dial is set to the "MAX
A/C" position, the air conditioning compressor will run
automatically and the light will come on. The
recirculation position will be selected automatically. In
this case, you cannot turn the air conditioning off or select
the outside position.
When the temperature control dial is set to a position other
than "MAX A/C", the air selection will automatically
change to outside air. The air conditioning compressor
will continue running.
Combination of unheated air and heated air
Select the mode selection dial to the positions shown in the
illustration and set the air selection switch (A) to the outside
position.
The air flow will be directed to the leg area and the upper part
of the passenger compartment. Select the desired blower speed.
Warm air flows to the leg area and unheated or slightly warm
air (depending upon temperature setting) flows to the upper
part of the passenger compartment.
I n f o r ma t i o n P r o v i d e d b y :
Comfort controls
N00731300110
5
5-11