Hazard Warning Flasher Switch - Mitsubishi ECLIPSE 2011 User Manual

NOTE
A light in the instrument panel flashes to show when the
front and rear turn signal lights are working properly.
If this light flashes faster than usual, check for a burned
out lamp bulb or malfunctioning connection.
If the panel light does not come on when the lever is
moved, check for a blown fuse or a burned out bulb in the
panel.
Have the vehicle inspected by an authorized Mitsubishi
Motors dealer or a repair facility of your choice.

Hazard warning flasher switch

If you press the flasher switch, the front and rear turn signals
will flash intermittently, and so will the hazard warning lights.
This is an emergency warning system and should not be used
when the vehicle is in motion, except for emergencies.
If you need to leave your vehicle, the flashers will keep work-
ing after the ignition key is removed.
NOTE
If you keep the flashers on for several hours with the
engine turned off, the battery will run down.
I n f o r ma t i o n P r o v i d e d b y :
Features and controls
N00522700246
3
3-131