Mitsubishi ECLIPSE 2011 User Manual page 341

Comfort controls
To skip or lock a desired channel using the MENU
mode
It is possible to make a setting to skip or lock a desired channel
during channel selection.
1. If you push the AUDIO switch (6) for at least about 2 sec-
onds while the system is receiving a satellite radio chan-
nel, the system will switch to MENU mode.
2. In the MENU mode, satellite radio channel SKIP setting
and LOCK setting and Speed Compensated Volume func-
tion (refer to "Speed Compensated Volume function" on
page 5-44) is possible.
Each time you push the AUDIO switch (6), the status will
change to the next one in the following sequence: "SCV
Select" (Speed Compensated Volume function) → "SKIP
setting" (the SKIP setting mode) → "LOCK setting" (the
LOCK setting mode) → Menu mode off
NOTE
5
The MENU mode will automatically shut off when either
the radio or CD is selected or the user does not move any
of the switches for 10 seconds.
SKIP settings, LOCK settings, and the lock cancellation
code are stored in memory. If a battery cable is discon-
nected, they will be erased. (The code will return to the
"1111" that was set at the factory.)
5-52
SKIP setting (SKIP setting mode)
It is possible to set a channel to be skipped during channel
N00761100032
selection. It is also possible to cancel a skip setting.
By turning the AUDIO switch (6), you can select "SKIP" or
"ALL UNSKIP". These functions are described below.
SKIP : Sets the channel that is currently being received
ALL UNSKIP : Cancels all channel skip settings.
LOCK setting (LOCK setting mode)
It is possible to lock a channel. It is also possible to cancel a
lock setting.
By turning the AUDIO switch (6), you can select "CH LOCK"
(or "UN LOCK"), "UN LOCK AL", or "CODE EDIT". These
functions are described below:
CH LOCK : Sets the channel that is currently being received
UN LOCK : Sets the channel that is currently being received
UN LOCK AL : Cancels all channel lock settings.
CODE EDIT : Changes the lock cancellation code.
NOTE
When the channel that is currently being received is not
locked, you can select "CH LOCK". When the channel
that is currently being received is locked, you can select
"UN LOCK".
I n f o r ma t i o n P r o v i d e d b y :
to be skipped.
to be locked.
to be unlocked.
N00761200033
N00761300034