Selector Lever Operation - Mitsubishi ECLIPSE 2011 User Manual

Features and controls
NOTE
During the break-in period or immediately after recon-
necting the battery, your vehicle may not shift smoothly.
This does not indicate a problem in the transaxle. Shifting
will become smoother once the transaxle has been shifted
several times by the electronic control system.

Selector lever operation

As an additional safety precaution, models equipped with an
automatic transaxle have a shift-lock device that holds the
selector lever in the "P" (PARK) position. To move the selector
lever from the "P" (PARK) position to another position, follow
the steps below.
3
1. Press and hold the brake pedal down.
2. Move the selector lever to the desired position.
NOTE
The selector lever cannot be moved from "P" (PARK) to
another position if the ignition key is at the "LOCK" posi-
tion, or has been removed, or if the brake pedal is not
pressed and held down.
3-72
The transaxle has 4 forward (4-speed automatic transaxle) or 5
forward (5-speed automatic transaxle) gears and 1 reverse gear.
The individual gears are selected automatically, depending on
the position of the gear selector lever, the speed of the vehicle
and the position of the accelerator pedal.
The selector lever has 2 "gates": the main gate (A) and the
manual gate (B).
N00513800182
NOTE
For information on manual gate operation, refer to "Sports
mode" on page 3-77.
I n f o r ma t i o n P r o v i d e d b y :