Mitsubishi ECLIPSE 2011 User Manual page 235

Features and controls
NOTE
When you press the SPEECH button to enter voice recog-
nition mode with a cellular phone paired to the system,
current information on the cellular phone, such as
"remaining battery life," "signal strength" or "roaming,"
will be displayed on the audio display.* (Refer to "Pairing
a cellular phone" on page 3-146.)
*: Some cellular phones will not send this information to
®
the Bluetooth HFP.
Call waiting and three-way calls can be used by the
®
Bluetooth HFP, only when those services can be used
with your cellular phone.
Users may experience a delay in vehicle audio when plac-
3
ing or answering a call from the handset. To reduce
delays, users should place calls and receive calls through
the Hands-free System.
3-140
Voice recognition function
®
The Bluetooth HFP is equipped with a voice recognition
function. Your voice will be recognized by a microphone in the
front pillar (driver's side), allowing you to make hands-free
calls with voice commands.
Voice recognition is possible in US English, North American
Spanish and Canadian French. The factory setting is US
English.
Some of the voice commands indicated below have a number
of alternative commands. For a table showing the voice com-
mands in each language and the corresponding alternative
commands, refer to "Commands and Alternatives" on page 3-
160.
NOTE
If the voice command that you say differs from the pre-
defined command or cannot be recognized due to ambient
noise or some other reason, the Bluetooth
you for the voice command again up to 3 times.
For best performance and further reduction of ambient
noise, the vehicle windows and the electric convertible
top (ECLIPSE SPYDER only) should be closed while
engaging the voice recognition function.
Selecting the Language
There are two ways to change the language.
NOTE
The more entries that are registered in the phonebook, the
longer it will take to change the language.
I n f o r ma t i o n P r o v i d e d b y :
N00506600090
®
HFP will ask