Mitsubishi ECLIPSE 2011 User Manual page 242

7. After the voice guide says "Please say a 4-digit pairing
code," say a 4-digit code. The 4-digit code will be regis-
tered as a pairing code for the phone.
When the confirmation function is on, the system will
confirm whether the code said is acceptable. To continue
with the code, answer "Yes."
Say "No" to return to pairing code selection.
NOTE
The pairing code entered here is only used for the
®
Bluetooth connection certification. It is any 4-digit code
the user would like to select.
Remember the pairing code as it needs to be keyed into
the phone later in the pairing process.
Depending on the Bluetooth
selected, entry of this code may be required each time the
phone attempts to "connect" to the Bluetooth
to your cellular phone owner's manual for connection
defaults and settings.
8. The voice guide will say "Start pairing procedure on
phone. See phone's manual for instructions." Refer to the
owner's manual for your cellular phone and enter into the
phone the pairing code that was registered in Step 7.
®
connection settings
®
HFP. Refer
I n f o r ma t i o n P r o v i d e d b y :
9. When the system finds a Bluetooth
phone, the voice guide will say "Please say the name of
the phone after the beep." After you hear the beep, name
the phone by saying a name of your preference.
When the confirmation function is on, the system will say
"Adding <name>, is this correct?"
Answer "Yes" to accept that name or "No" to reenter a
new name.
NOTE
When the system cannot recognize the Bluetooth
patible cellular phone, the pairing process will end and the
system will beep and then return to normal status.
Try the pairing process again after reconfirming whether
®
or not the Bluetooth
compatible cellular phone.
10. The voice guide will say "Assign a priority for this phone
between 1 and 7 where 1 is the phone used most often."
Say a number between 1 and 7 to set a priority level for
the cellular phone.
NOTE
If you selected a priority level that has already been set for
a different phone, the system will ask you whether you
wish to override that priority level.
To override the priority level, answer "Yes."
Answer "No" to return to the priority level selection in
Step 10.
Features and controls
®
compatible cellular
®
com-
HFP supports your Bluetooth
3-147
3
®