Dimmer (High/Low Beam Change) - Mitsubishi ECLIPSE 2011 User Manual

Features and controls
When you want to keep the lights on:
If the light switch is turned to the "
after the engine is turned off, the 3 minute auto-cutout function
described above will not work. The lights (the parking lights,
tail lights and license plate lights) will stay on and will not turn
off automatically.
NOTE
When the driver's door is opened, a continuous high-
pitched tone will sound if the key has been removed; a
continuous low-pitched tone will sound if the key is in the
ignition switch.
The tone stops sounding when the driver's door is closed.
3
Headlight reminder buzzer
If the driver's door is opened with the key in the "LOCK" or
"ACC" position or removed from the ignition switch while the
lights are on, the tone will sound to remind you to turn off the
lights. The lights will turn off automatically and so will the
tone. Or you can turn the light switch to the "OFF" position to
stop the tone.
3-128
" or " " position again
N00549800138
I n f o r ma t i o n P r o v i d e d b y :

Dimmer (high/low beam change)

To change the headlights from high beam to low beam and vice
versa, turn the light switch to the "
turn signal lever to fully toward you (1). Switch the headlights
to low beam as a courtesy whenever there are oncoming vehi-
cles, or when there is traffic moving ahead of you. An illumi-
nated blue light in the instrument cluster indicates when the
headlights are on high beam.
N00549900168
" position, then pull the