Maintenance; Resetting; Partial Reset - Icom ID-5100E Basic Manual

9

MAINTENANCE

■ Resetting

Occasionally, erroneous information will be displayed when,
for example, first applying power. This may be caused exter-
nally by static electricity or by other factors.
If this problem occurs, turn OFF power.
After waiting a few seconds, turn ON power again. If the prob-
lem is still there, perform a Partial reset or an All reset.
A Partial reset resets the operating settings to their default
values (VFO frequency, VFO settings, menu contents) with-
out clearing the items below:
• Memory channel contents
• Call channel contents
• Message data
• GPS Memory contents
BE CAREFUL! An All reset clears all programming and
returns all settings to their factory defaults. See the Full
Manual for details.
D Partial Reset
Touch [MENU].
q
Touch "Reset."
w
(Manage Memory > Others > Reset)
• If the item is not displayed, touch [∫] or [√] one or more times to
select the page.
87
• Scan Edge contents
• Call sign memories
• DTMF memory contents
• Repeater list
Touch "Partial Reset."
e
Touch [YES].
r
The transceiver displays "PARTIAL RESET," then the
•
partial reset is completed.