Icom ID-5100E Basic Manual page 45

2. Select the Destination repeater ("TO")
Touch the "TO" field.
u
• Check whether "TO" is selected.
Touch the "TO" field again.
i
• Opens the "TO SELECT" screen.
Touch "Gateway CQ."
o
• Opens the "REPEATER GROUP" screen.
!0 Touch the repeater group where your destination repeater
is listed. (Example: "11: Japan")
!1 Touch your destination repeater. (Example: "Hamacho")
• Returns to the DR screen, and the selected repeater name is
displayed in "TO."
D-STAR OPERATION
3. Check whether you can access the repeater
!2 Hold down [PTT] for approximately 1 second to access the
repeater.
!3 If you get a reply call, or "UR?" appears on the LCD within
3 seconds, your signal reached your access repeater and
your call was successfully sent from your destination re-
peater.
Successfully sent!
NOTE: See page 43 for status indications after a repeater
system reply is received.
4
4
32