Installation And Connections . 80−86; Connect Controller To Main Unit; Microphone Connection; Dc Power Supply Connection - Icom ID-5100E Basic Manual

■ Connect controller to main unit

Connect the controller to the main unit with the supplied con-
trol cable.
• The following longer cables may be required, depending on
the installation location.
OPC-440
mic extension cable
OPC-647
mic extension cable
OPC-1156
controller extension cable
SP-35 :
external speaker
SP-35L :
external speaker
SP-30 :
external speaker
Controller
6-pin connector 6-pin connector

■ Microphone connection

Plug in the microphone to the microphone connector on the
main unit as shown in the illustration below.
Controller
Main unit
INSTALLATION AND CONNECTIONS
: 5 m (16.4 ft)
: 2.5 m (8.2 ft)
: 3.5 m (11.4 ft)
2 m (6.5 ft)
6 m (19.6 ft)
2.8 m (9.1 ft)
Main unit
Microphone

■ DC power supply connection

Use a 13.8 V DC power supply with at least 20 A capacity.
Connect the black DC power cable to the (–) Negative termi-
nal, and the red DC power cable to the (+) Positive terminal.
R WARNING! NEVER remove the fuse holders from the
DC power cable.
• CONNECTING TO A DC POWER SUPPLY
Main unit
DC power
supply 13.8 V
to an
AC outlet
−
Red Black
⊕
See page 85 for a car battery connection.
8
−
⊕
Fuses
15 A
8
80