Advanced Network Features; Print The Network Configuration Report - Dell E310dw User Manual

5. Press p or q to select the PIN Code option, and then press OK.
6. When Wi-Fi Direct On? appears, press p to accept. To cancel, press q .
7. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when Activate Wi-Fi Direct on other device and press OK. appears on the
machine's LCD. Press OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Back.
8. The machine will wait for a connection request from your mobile device. When Input PIN Code appears,
enter the PIN displayed on your mobile device in the machine.
9. Press OK.
10. If your mobile device connects successfully, the machine's LCD displays Connected. You have completed the
Wi-Fi Direct network setup.
Configure Your Wi-Fi Direct Network Manually
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.
1. Press p or q to select the Network option, and then press OK.
2. Press p or q to select the Wi-Fi Direct option, and then press OK.
3. Press p or q to select the Manual option, and then press OK.
4. When Wi-Fi Direct On? appears, press p to accept. To cancel, press q .
5. The machine will display the SSID name and Password for two minutes. Go to your mobile device's wireless
network settings screen and enter the SSID name and password.
6. If your mobile device connects successfully, the machine's LCD displays Connected. You have completed the
Wi-Fi Direct network setup.

Advanced Network Features

• Print the Network Configuration Report

The Network Configuration Report lists the current network configuration, including the network print server
settings.
Print the Network Configuration Report
The Network Configuration Report lists the current network configuration, including the network print server
settings.
NOTE: Node Name: The Node Name appears on the current Network Configuration Report . The default Node
Name is "DELLxxxxxx" (where "xxxxxx" is the first six digits of your machine's MAC Address / Ethernet Address .)
NOTE: If the IP Address on the Network Configuration Report shows 0 .0 .0 .0, wait for one minute and try
printing it again .
NOTE: You can find your machine's settings, such as IP address, subnet mask, node name, and MAC Address on
the report, for example:
Network 101