Dell E310dw User Manual page 94

Network Key
12345
NOTE: Your access point/router may support the use of multiple WEP keys, however your Dell machine supports
the use of the first WEP key only .
NOTE: If you need assistance during setup and want to contact Dell Customer Service , make sure you have your
SSID (Network Name) and Network Key ready . We cannot assist you in locating this information .
NOTE: If you do not know this information (SSID and Network Key), you cannot continue the wireless setup .
How can I find this information?
• Check the documentation provided with your wireless access point/router.
• The initial SSID could be the manufacturer's name or the model name.
• If you do not know the security information, please consult the router manufacture, your system
administrator, or your Interner provider.
2. Press p or q to select the Network option, and then press OK.
3. Press p or q to select the WLAN option, and then press OK.
4. Press p or q to select the Setup Wizard option, and then press OK.
5. When WLAN Enable? appears, press p to select On.
This will start the wireless setup wizard. To cancel, press Back.
6. The machine will search for your network and display a list of available SSIDs. When a list of SSIDs appears,
press p or q to select the SSID you want.
7. Press OK.
8. Do one of the following:
• If you are using an authentication and encryption method that requires a Network Key, enter the Network Key
you wrote down in the first step.
Enter the WEP key, and then press OK to apply your settings.
To apply the settings, press p. To cancel, press q .
• If your authentication method is Open System and your encryption mode is None, go to the next step.
• If your WLAN access point/router supports WPS, WPS is available appears. To connect your machine
using the automatic wireless mode, press p. (If you choose No , enter the Network Key you wrote down in the
first step.) When Press WPS on rtr appears, press the WPS button on your WLAN access point/router,
and then press q twice.
9. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays Connected. The machine will print
your machine's wireless status report. If the connection fails, check the error code on the printed report.
NOTE: If the connection fails, your machine reverts to a wired network interface .
For Windows :
®
You have completed the wireless network setup. Install drivers and software necessary for operating your device from
the Installer CD-ROM.
For Macintosh:
94 Network