Dell E310dw User Manual page 149

• Check the paper type and quality. High temperatures and high humidity will cause paper to
• If you do not use the machine often, the paper may have been in the paper tray too long.
• Open the back cover (face-up output tray) to let the printed paper exit onto the face-up
• Choose Reduce Paper Curl mode in the printer driver when you do not use our
Curled or wavy
• Make sure paper is loaded correctly.
• Check the paper type and quality.
• Turn over the stack of paper in the tray or rotate the paper 180° in the input tray
Wrinkles or creases
• Make sure the two levers inside the back cover are in the up position. Pull up the two levers
Poor fixing
• Make sure the media type setting in the driver matches the type of paper you are using.
• Choose Improve Toner Fixing mode in the printer driver.
curl.
Turn over the stack of paper in the paper tray. Also, fan the paper stack, and then rotate the
paper 180°in the paper tray.
output tray.
recommended print media.
until they stop.
If this selection does not provide enough improvement, change the printer driver setting
in Media Type to a thick setting. If you are printing an envelope, choose Env. Thick in the
media type setting.
.
Troubleshooting 149