SunStar KM-2070P User Manual page 6

1-4) Machine Operation
Warning
1-5) Devices for Safety
Warning
KM-2070P Series is made to sew patterns on fabrics and other similar material for
manufacturing.
Follow the following indications when operating the machine.
ⓐ Read through this manual carefully and completely before operating the machine.
ⓑ Wear the proper clothes for work.
ⓒ Keep hands or other parts of the body away from the machine operation parts(needle, shuttle,
thread take-up lever, and pulley etc.) when the machine is being operated.
ⓓ Keep the covers and safety plates on the machine during operation.
ⓔ Be sure to connect the earthing conductor.
ⓕ Turn off the electric main power and check if the switch is turned "off"before opening
electric boxes such as the control box.
ⓖ Stop the machine before threading the needle or checking after work.
ⓗ Do not step on the pedal when turning the power on.
ⓘ Do not operate the machine with any cooling fan blocked.
The air-filter on control box must be cleaned once a week.
ⓙ If possible, install the machine away from source of strong electrical noise such as high
frequency welding machines
[ Warning ]
Belt will crush or amputate finger or hand, keep cover in place before operating, turn off
power before inspecting or adjusting.
ⓐ Safety label : It describes cautions during operationg the machine.
ⓑ Face plate guard : It prevents from any contact between body and take-up lever.
ⓒ Belt cover : It prevents from insertion of hands. feet or clothes by beit.
ⓓ Label for specification of power : It describes caution for safety to protect against electric shock
during rotating the motors.
ⓔ Finger guard : It prevent from contacts between a finger and needle.
ⓑ
ⓔ
ⓓ
6
ⓐ
ⓒ