14
Fireplace Placement Requirements
The fireplace requires a 1/2" clearance from the angled sides and back of the fireplace to the framing
members. No material (insulation, framing, etc.) may be placed into this area.
Fireplace must be installed on a level surface capable of supporting the fireplace and vent.
Fireplace must be placed directly on wood or non-combustible surface (not on linoleum or carpet).
This heater may be placed in a bedroom.
Clearances
When installed, walls in front of the fireplace must be a minimum 1" to the side of the fireplace.
Due to the high temperature, the heater should be located out of traffic and away from furniture and
draperies.
Fireplace must be placed so the vents below and above the glass do not become blocked.
Raised Fireplaces
The fireplace (and hearth, if desired) may be placed on a platform designed to support the fireplace
(95 Lbs.) and vent.
Optional Hearth
Travis Industries
Installation
Ceiling
Minimum
57"
Raised
Platform
(for qualified installers only)
4140312
Min. Enclosure Height
Top Vent = 48"
Rear Vent = 34-1/4"
100-01305