Glass Frame Removal And Installation - Travis Industries 21 TRV GSR2 Installation Manual

40 Finalizing the Installation

Glass Frame Removal and Installation

Warning: The appliance must be completely cool before removing the glass.
Warning: Do not strike or slam the glass.
Open the two latches holding the glass
a
frame in place - follow the directions
shown to the right.
Glass Frame Brackets
Tilt the glass frame forward then lift it up. The tabs
b
on the glass frame will disengage from the slots on
the glass frame brackets attached to the fireplace.
Re-Attaching the Glass Frame:
a) Tilt the glass frame as shown above.
b) Insert the tabs on the glass frame into the slots on the glass frame brackets (attached to the fireplace).
c) Attach the two glass latches.
NOTE: Make sure the glass frame is all the way in place - it should be flush with the front of the fireplace
when installed.
Travis Industries
Glass Frame
(for qualified installers only)
Catch
(on glass frame)
4140312
Latch
Top of
Firebox
Glass
100-01305