Sequence Cooking; Instant Cook - Sharp R-778K(S) Operation Manual

Sequence Cooking

Your oven can be programmed for up to 4 automatic cooking sequences, switching from one variable
power setting to another automatically.
Note that POWER LEVEL must be entered first when programming sequence cooking.
* Suppose you want to cook for 10 minutes on 50% (MEDIUM power) followed by 5 minutes on 100%
(HIGH power).
Step
Procedure
Select desired power level by pressing
the POWER LEVEL pad (for 50% press
1
three times).
Enter desired cooking time.
2
For second sequence, select microwave
cooking and power level (for 100% press
3
the POWER LEVEL pad once).
Enter desired cooking time.
4
Press the INSTANT COOK/START pad.
5

Instant Cook™

For your convenience Sharp's Instant Cook allows you to easily cook for one minute on 100% (HIGH
power).
Step Procedure
Press the INSTANT COOK/START pad.
1
(Within one minute of closing the door.)
Press the INSTANT COOK/ START pad until desired time is displayed.
Each time the pad is pressed, the cooking time is increased by 1 minute.
Pad Order
x 3
1 0 0 0
x 1
5 0 0
Pad Order
E – 10
Display
%
COOK
COOK will flash on and off.
%
COOK
COOK will flash on and off.
COOK
The timer begins to count
down to zero. When it
reaches zero,
COOK
the second sequence will
appear and the timer will
begin counting down to
zero again.
Display
COOK
The timer begins to count
down.