Displaying The Time Code; Copying The Setting Or Adjustment Value To Another; Monitor - Sony Trimaster BVM-L231 Operation Manual

Displaying the Time Code

The time code superimposed on the SDI signals is
displayed by installing the optional input adaptor (BKM-
250TG).
Note
As the time code is superimposed on the video signal, the
time code may be invisible partially because of the scan
mode setting of the monitor.
1
Input the SDI signal.
2
Select the channel.
3
Set the time code in the Time Code menu (page 76) of
the On Screen Set menu of the System Configuration
menu.
To set the type of the time code
Set in the VITC/LTC menu.
VITC: Sets to VITC.
LTC: Sets to LTC.
To set the display position for the time code
Set in the Position menu.
Top Left: To display it at top left on the screen
Top Center: To display at top center on the screen
Top Right: To display at top right on the screen
Bottom Left: To display at bottom left on the screen
Bottom Center: To display at bottom center on the
screen
Bottom Right: To display at bottom right on the
screen
4
Set Time Code (page 71) to On in the Function Switch
menu of the Display Function menu or by pressing the
Time Code button* of the controller.
The time code is displayed.
To cancel the time code display
Set Time Code (page 71) to Off in the Function Switch
menu of the Display Function menu or by pressing the
Time Code button* of the controller.
* Time Code is assigned to the function button of the controller in
the Function Key menu (page 84) of the Controller menu.
Note
Use the controller with software version 1.4 or higher to
assign Time Code function to the function button of the
controller.
Copying the Setting or
Adjustment Value to
Another Monitor
You can save the setting or adjustment value in the
"Memory Stick" and copy it to another monitor.
1
Insert the "Memory Stick" into the Memory Stick
insertion slot of the controller.
For details on the "Memory Stick", see
"Inserting/Ejecting the "Memory Stick"" on page
137.
2
Select Memory Stick in the Save To menu (page 79) of
the File Management menu, and then select New
Name or the existing file name.
When you select New Name, the display to create a
new name appears.
Display example
iiiFile Management
Save to Memory Stick
New Name
File1
File2
File3
Enter a new name (1 to 20 characters).
When the existing file name is selected, the display to
confirm a file name appears.
Display example
iiiiFile Management
Save to Memory Stick
FileX
Overwrite this file?
Displaying the Time Code / Copying the Setting or Adjustment Value to Another Monitor
OK: ENTER Cancel: MENU
97