Copying The Setting Or Adjustment Value To; Another Monitor - Sony BVM-E250 Operation Manual

With serial number 7300001 or higher:
– Difference
– Four other display modes
• To assign Checkerboard or L/R Switch to a function
button of the controller, use the controller with software
version 1.5 or higher. To assign Difference, Horopter
Check or Flip H to a function button of the controller, use
the controller with software version 1.6 or higher
• If you change the channel when the 3D signal analyzing
function is On, it is switched to Off.
• If you display the Picture&Picture image when the 3D
signal analyzing function is On, it is switched to Off.
• If the input signal system is changed when the 3D signal
analyzing function is On, the 3D video image may not be
displayed correctly.
• The 3D signal analyzing function cannot be set to On in
the following cases:
– When the option port number in which the BKM-
250TG is installed is not selected in Input Port of the
Channel Configuration menu
– When dual-link display is used
– When the internal signal is displayed
– When a captured frame is displayed
– When Side by Side, Wipe, Butterfly or Blending is set
to On
• The display of the 3D signal analyzing function may not
be performed correctly when H Delay is set to On.
• If saving is performed in HD Frame Capture when a 3D
signal analyzing function other than Flip H is in use, the
function is deactivated and the normal display is
restored.
94
Copying the Setting or Adjustment Value to Another Monitor
Copying the Setting or
Adjustment Value to

Another Monitor

You can save the setting or adjustment value in the
"Memory Stick" and copy it to another monitor.
1
Insert the "Memory Stick" into the Memory Stick
insertion slot of the controller.
For details on the "Memory Stick", see
"Inserting/Ejecting the "Memory Stick"" on page
128.
2
Select Memory Stick in the Save To menu (page 74) of
the File Management menu, and then select New Name
or the existing file name.
When you select New Name, the display to create a
new name appears.
Display example
iiiFile Management
Save to Memory Stick
New Name
File1
File2
File3
Enter a new name (1 to 20 characters).
When the existing file name is selected, the display to
confirm a file name appears.
Display example
iiiiFile Management
Save to Memory Stick
FileX
Overwrite this file?
OK: ENTER Cancel: MENU