Problem Solving Guide - Miele DG 6010 Operating Instructions Manual

With the aid of the following guide, minor problems can be diagnosed and easily
corrected without contacting Miele. This will save you time and money because
you won't need to book a service technician.
Please note that a call-out fee will be applied to unnecessary service visits where
the problem could have been rectified as described in these operating
instructions.
,
Repairs to electrical appliances must only be carried out by a suitably
qualified and competent person in strict accordance with current local and
national safety regulations. Repairs and other work by unqualified persons
could be dangerous. The manufacturer cannot be held liable for unauthorised
work.
Problem
You cannot switch the
appliance on.
The appliance does not
heat up.
Possible cause and remedy
The fuse is defective or has tripped.
^ Reset or replace the fuse (Minimum fuse rating -
see data plate).
There may be a technical fault.
^ Disconnect the appliance from the mains
connection for approx. 1 minute:
– switch off at the wall socket, or switch off the
safety fuse, or
– switch off the fault-current circuit breaker.
Reset the trip switch in the mains fuse box, and
switch the appliance back on. If the appliance still
will not switch on, contact a qualified electrician or
Miele.
The Demo mode has been switched on.
^ You need to deactivate the Demo mode (see
"Settings").
The interior of the steam oven has heated up due
to a warming drawer operating underneath it.
^ Open the door and allow the steam oven interior
to cool down.

Problem solving guide

81