Miele DG 6010 Operating Instructions Manual page 82

Problem solving guide
Problem
The fan can still be
heard after the
appliance has been
switched off.
The water container
has become harder to
put into the appliance
and take out again.
After moving house,
the appliance no
longer switches from
the heating-up phase
to the cooking phase.
During operation an
unusually large
amount of steam
escapes or steam
escapes from parts of
the steam oven where
it does not usually.
After a period of time,
the door makes a
noise when it is
opened and closed.
82
Possible cause and remedy
The appliance is fitted with a fan which removes steam
from the oven. The fan will continue to run for a while
after the appliance has been switched off. It switches
itself off automatically.
The coupling seal on the water container has become
stiff.
^ Lightly lubricate the coupling seal on the water
container with silicone grease (see "Cleaning and
care > Coupling seal").
Altitude affects the boiling point of water. If you move
house, the appliance will need to be reset for the new
altitude if this differs from the old one by more than
300 m.
^ To do this, descale the appliance (see "Cleaning and
care > Descaling").
The door is not properly closed.
^ Close the door.
The door seal isn't fitted correctly.
^ If necessary, press it in all the way round the door to
make sure it is fitted evenly.
The door seal is damaged, e.g. cracked.
^ Call Miele to replace the seal.
^ Lubricate the door hinges with the silicone grease
supplied.