Operation Principles; Preparation; Setting The Temperature And Duration - Miele DG 6010 Operating Instructions Manual

Operation principles

Preparation

Setting the temperature and duration

22
^ Fill the water container with mains water up to at least the
"min" marker. You do not need to remove the insert.
Only use mains tap water. Never use distilled or mineral
water or other liquids.
^ Push the water container into the appliance until it
connects.
If the water container is not positioned correctly, the
appliance will not heat up and after a while F20 will appear in
the display (see "Problem solving guide").
^ Place the food in the steam oven.
^ Touch the s sensor to switch the appliance on.
"100 °C" will appear in the display. "°C" will start flashing.
^ If you want to cook with 100 °C, confirm with "OK".
If necessary, you can reduce the temperature by touching the
? sensor. Confirm with "OK".
Once you have confirmed the temperature, 3 zeros will
appear and "h" will flash in the display.
^ Set the cooking duration you want by touching ; (from
0:00 upwards) or ? (from 9:59 downwards).
^ Confirm your selection by touching "OK".
The appliance will start automatically after the duration has
been confirmed.
If you do not complete these steps within 15 minutes, the
appliance will switch itself off.