Miele DG 6010 Operating Instructions Manual page 83

Problem
The p symbol
appears in the
display and an
audible tone may
sound.
The heating-up
phase lasts an
unusually long time.
k and a number
between 1 and 10
appear in the
display.
"0:22h" and k are
flashing.
Possible cause and remedy
The water container has not been pushed right into the
appliance so that it connects.
^ Remove the water container and push it in so that it
connects.
There is not enough water in the water container. The
water level must be between the two markers.
^ Fill the water container with water.
The water container contains excessive limescale
deposits because the correct water hardness level has
not been set for the local water supply.
^ Set the correct water hardness level for your water
supply (see "Settings"), and descale the appliance as
described in "Descaling".
If the water hardness level was in fact set correctly or the
problem occurs again, contact Miele.
The appliance needs to be descaled.
^ Proceed as described in "Descaling".
Problem solving guide
83