Boot - Boot Settings Configuration - Kontron KTUS15/mITX User Manual

KTD-00774-D
7.5.1 Boot – Boot Settings Configuration
Boot Settings Configuration
Quick Boot
Quiet Boot
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait for 'F1' If Error
Hit 'DEL' Message Display
Interrupt 19 Capture
PC Speaker/Beep
Force boot Device
V02.63+ (C)Copyright 1985-2008, American Megatrends, Inc.
Feature
Quick Boot
Quiet Boot
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait for 'F1' If Error
(see note)
Hit 'DEL' Message Display
Interrupt 19 Capture
PC Speaker/Beep
Force boot Device
Note: List of errors:
<INS> Pressed
Timer Error
Interrupt Controller-1 error
Keyboard/Interface Error
Halt on Invalid Time/Date
NVRAM Bad
KTUS15/mITX
BIOS SETUP UTILITY
Boot
[Enabled]
[Disabled]
[Force BIOS]
[On]
[Auto]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
Options
Enabled
Disabled
Disabled
Enabled
Black Screen
White Screen
Force BIOS
Keep current
Off
On
Disabled
Enabled
Auto
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Primary IDE Master
Primary IDE Slave
Third IDE Master
Third IDE Slave
Network
Primary Master Hard Disk Error
S.M.A.R.T HDD Error
Cache Memory Error
DMA Controller Error
Resource Conflict
Static Resource Conflict
Allows BIOS to skip
certain tests while
booting. This will
decrease the time needed
to boot the system.
<->
||
Enter Go to Sub Screen
F1
F10
ESC
Description
Allows BIOS to skip certain tests while booting in
order to decrease boot time.
Disabled: Displays normal POST messages.
Enabled: Displays OEM Logo (no POST messages).
Black Screen: No picture.
White Screen: White picture.
Set display mode for Option ROM.
Select Power-on state for numlock
Select support for PS/2 Mouse.
Wait for F1 key to be pressed if error occurs.
Displays "Press DEL to run Setup" in POST.
Enabled: Allows option ROMs to trap interrupt 19
Control the default beeps during boot of the system.
This setting will also control the beep during
enumeration and (un)plug of USB.
Overrides current boot setting. Device must be in the
boot priority menu, though. If the device fails to boot,
the system will NOT try other devices.
PCI I/O conflict
PCI ROM conflict
PCI IRQ conflict
PCI IRQ routing table error
Page 73 of 82
Select Screen
Select Item
General Help
Save and Exit
Exit
www.kontron.com