Kontron KTUS15/mITX User Manual page 11

KTD-00774-D
Winbond W83627DHG LPC Bus I/O Controller
I/O Control
•
Four USB 2.0 ports on I/O area
•
Four USB 2.0 ports on internal pinrows
•
Two / Four Serial ports (RS232C) (depending on board configuration)
•
One Parallel port, SPP/EPP/ECP
•
Two Serial ATA-150/300 IDE AHCI (depending on board configuration) w. RAID
Peripheral
support.
interfaces
•
One PATA 33/66/100 interface with support for 2 devices
•
CF (Compact Flash) interface supporting CF type I and II. (UDMA2 max.). Note that
only one PATA device is supported when CF is used and only by use of 40-wire cable
(not 80-wire cable). Optionally, use SATA devices.
•
PS/2 keyboard and mouse ports
•
10/100/1000Mbits/s LAN using Intel ® 82574L controllers
LAN
•
RPL/PXE netboot supported. Wake On LAN (WOL) supported (S3 only).
Support
•
Kontron Technology / AMI BIOS (core version 8.00)
•
Support for Advanced Configuration and Power Interface (ACPI 3.0), Plug and Play
o
o
o
•
Secure CMOS/ OEM Setup Defaults
BIOS
•
"Always On" BIOS power setting
•
System Locked Pre-Activation (SLP) key support
•
Boot-Logo / Long splash support
•
Setup for Forced Boot device
•
Desktop Management Interface (DMI) with user-configurable setup
•
TPM version 1.2 support
•
PCI Bus routed to 1 PCI slot (PCI Local Bus Specification Revision 2.3)
•
PCI-Express bus routed to 2 (x1)PCI Express slots (PCI Express 1.0a)
•
Two Secure Digital I/O (SDIO) card slots (backside)
•
SMBus routed to TPM header, Feature connector, PCI, and PCI Express Slot
Expansion
connectors
Capabilities
•
LPC Bus routed to TPM connector
•
DDC Bus routed to LVDS and CRT /DVI connector
•
8 x GPIOs (General Purpose I/Os) routed to FEATURE connector
•
Smart Fan control system, support Thermal® and Speed® cruise for two onboard Fan
control connectors: FAN_CPU and FEATURE
•
Three thermal inputs: CPU die temperature, System temperature and External
Hardware
temperature input routed to FEATURE connector. (Precision +/- 3ºC)
Monitor
•
Voltage monitoring
Subsystem
•
Intrusion detect input
•
SMI violations (BIOS) on HW monitor not supported. Supported by API (Windows).
•
WinXP Professional
•
Windows Vista
•
Windows 7 *
Operating
•
WinXP Embedded *
Systems
•
Linux: Fedora Core 9 *, Fedora Core 10 *, Moblin *, Suse 11.1 *, Ubunty Jaunty (alpha
Support
version) *
* = Limitations may apply (not all functions, drivers and features are tested).
KTUS15/mITX
Suspend To Ram
Suspend To Disk
Intel Speed Step
Page 11 of 82
(Continues)
www.kontron.com