Aastra Office 80 User Manual page 45

I Paging an Internal Subscriber
You are unable to reach an internal subscriber and thus want to page them.
If the system is equipped with a paging system (PS), the person can be paged. The paged per-
son can answer from any phone.
Menu
Call features
Page
<Phone number>
Enter #36.
Enter your internal phone number.
Enter your PIN.
Enter the internal or external phone number with the exchange access digit.
Pick up the handset.
© The phone number displayed is dialled.
Note:
When you hang up, dialling by name and your private phone book remain
available for a whole minute so you can make another call.
Or:
• Enter #46 for a private call.
• Enter your internal phone number.
• Enter your PIN.
• Enter the external call number directly, without the exchange access digit.
• Pick up the handset.
© The phone is now enabled; the external subscriber is called.
Note:
The factory setting "0000" is not accepted. First change the PIN (see Chapter
"Changing the PIN", page 58) or using the */# procedure *47 (see "User's Guide
*/# Procedures as of I7.1"). If you have forgotten your PIN, your system admin-
istrator can reset it to the factory setting.
Press the Menu Foxkey.
Scroll to Call features and press the
Scroll to Seach and confirm
Enter the phone number f the person to be paged and confirm with the
Foxkey.
© The person is paged and sees your phone number on the pager.
Supplementary features
Select Foxkey.
Ok with the Foxkey.
Ok
45