<Phone number>
I Activating/Deactivating a Discreet ring
You do not want to be disturbed by your phone ringing. However, you do not want to switch off
your phone.
Discreet ringing is available on your phone as an alternative to the usual ringing. If discreet ring
is activated, the phone rings only once.
This function must be stored under a Foxkey or a function key (see Chapter
page 62).
I Suppressing your call number from your called party's terminal display
You do not want your call number to appear on the terminal display of a called party in the pub-
lic network.
You have two possibilities:
• If you never want the phone number to be displayed, set
• To suppress your call number display for certain calls only, select the function
before dialling your party's call number.
This function must be stored under a Foxkey or a function key (see Chapter
page 62).
You can also execute the function with a */# procedure (see "User's Guide */# Procedures as of
I7.1").
Enter your own phone number and confirm with the
©
You are now connected with the person who is trying to reach you.
Note:
You can also answer a general bell with the */# procedure *83.
In the idle state:
Press the function key for
©
is displayed.
Before the call:
Press the function key for <CLIR>.
Notes:
• CLIR works only with external calls.
• This feature depends on the range of services offered by your provider.
Supplementary features
<Discreet
ring>.
CLIR
permanently.
Ok
Foxkey.
"Configuring
Keys",
CLIR per call
"Configuring
Keys",
47