Monitoring Operations: Display Of Indoor Unit And Outdoor Unit Sensor Temperatures - Sanyo SPW-C256VH Technical Data & Service Manual

6-4. Monitoring Operations: Display of Indoor Unit and Outdoor Unit Sensor Temperatures

<Operating procedure>
(1) Press and hold the
longer to switch to temperature monitor mode.
During temperature monitoring, "Service Monitor" is lit.
(The display and operations are the same as when monitor mode is started
from the unit remote controller.)
(2) Press the
(3) Use the temperature setting
code of the temperature to monitor.
The selected indoor unit No. and the temperature data are displayed.
(4) To end monitoring, press the
* The display does not blink.
Indoor unit data
Outdoor unit data
6
* Depending on the model, some items may not be displayed.
button and button simultaneously for 4 seconds or
button and select the indoor unit to monitor.
and
button. The display returns to the normal display.
Item code
02 Indoor unit intake temp.
03 Indoor unit heat exchanger temp. (E1)
04 Indoor unit heat exchanger temp. (E2)
05 –
06 –
07 –
08 –
09
0A Discharge temp. (TD)
0b –
0C Outdoor unit heat exchanger temp. (C2)
0d Intake temp. (TS)
0E Outdoor unit heat exchanger temp. (C1)
0F –
10 –
11 Outdoor air temp. (TO)
12 –
13 –
14 Current value
15 Outdoor MV value (1)
16 Outdoor MV value (2)
19 Frequency
buttons to select the item
Meaning of Code
6-6
(4)
(1) (2)
(3)