Remote Controller Servicing Functions; Test Run Function; List Of Servicing Functions - Sanyo SPW-C256VH Technical Data & Service Manual

7-7. Remote Controller Servicing Functions

•
The remote controller includes a number of servicing functions. Use these as needed for test runs and inspections.

List of Servicing Functions

Functions
Operation with forced
Test run
thermostat ON
Sensor
Temperature display
temperature
from each sensor
display
Servicing
Alarm history display
check display
Filter lifetime, operating
Simple mode priority, central
settings control address, and
other settings
System address, indoor
Detailed unit address, central
settings control address, and
other settings
Automatic address
Automatic setting based on
address command from the
wired remote controller
Address Change of indoor unit
change address

7-8. Test Run Function

Operates the unit with the thermostat forced ON.
<Procedure>
1 Press and hold the
longer.
2 "Test" appears on the remote controller LCD
display (Fig. 7-3).
3 Start operation.
4 Press the
controller display.
7
Description
Press and hold the
seconds or longer.
Press and hold the
buttons for 4 seconds or longer.
Press and hold the
buttons for 4 seconds or longer.
Press and hold the
buttons for 4 seconds or longer.
Press and hold the
longer.
Press and hold the
timer operation
seconds or longer.
Press and hold the
timer operation
seconds or longer.
button for 4 seconds or
button to return to normal remote
Button operation
button for 4
and
and
and
, and
buttons for 4 seconds or
and the
buttons for 4
and the
buttons for 4
7-16
Reset operation Unit status
Current operation is
maintained.
Press the
button.
When settings
are made from a
remote controller,
the indoor unit
where that remote
controller is
connected stops.
Automatic reset
Entire system
stops.
Press the
button.
1 4
RCS-TM80BG
Fig. 7-3
2
3