Ending Calls; Options During A Call; Answering A Call During A Call (Call Waiting) - Mitel 600 Series User Manual

Mitel 600 Series DECT Phone User Guide
Note: You can also access the Info menu/call list via the Navigation menu (see
Line and Idle Display" on page
in idle mode.

ENDING CALLS

You can end calls by pressing the End key.

OPTIONS DURING A CALL

If required you can select a call number from the available lists and dial into an existing connection
(DTMF suffix dialling).
Press >>> and select a call number from the following lists:
• Personal directory
• Redial list
• Caller list

ANSWERING A CALL DURING A CALL (CALL WAITING)

If you do not want to be disturbed, you can switch off the call waiting function (see
Menu] menu" on page
If call waiting is activated, you will hear the ringing tone and see the call in the display. You can
answer the waiting subscriber as shown below..
Press the R key.
or ...
Press the Call key.
or ...
Press the >>> key, and select Receive.
In the case of a second connection, the following options are available:
Close current connection
Press >>> and select Release call.
Press >>> again and select Retrieve.
or ...
Press the R softkey, or the Call key.
40
18) or via the Menu Access >>> when the DECT phone is
57).
"Softkey
"[System