3. Enter the conference target's number.
4. Wait for an answer, consult, and then press the Join Calls softkey to create the three-way
conference call.
Notes:
1. Pressing the Trade Calls softkey swaps the active call with the other party currently on
hold.
2. Pressing the Split softkey splits the conference call by placing all callers on hold except
for the initial caller.
5. Repeat steps 2 to 4 to add additional parties to the conference.
Note: If you want to create a conference call with two parties you are already in calls with (on
different line appearances), press the Add Held softkey and press the applicable Line key with the
held call.
Ending a conference and transferring remaining parties
The Mitel MiVoice 6930 IP phone allows a host to easily leave a conference call without disrupting
the connection of the other remaining parties.
If you are the host of a conference call and want to leave the conference, press the Leave Call
softkey on the phone. Your phone leaves the conference call but the remaining parties are still
connected together.
Ending calls
To end a call, you first need to connect or reconnect to the call if not already connected (e.g. if your
caller is on hold). With the call connected, place the handset on its cradle, press the End Call softkey,
or press the
(Goodbye) key.
Handling calls
67