Softkey Line And Idle Display; Led - Mitel 600 Series User Manual

Mitel 600 Series DECT Phone User Guide
Mitel 650c only
The symbol is displayed when a connection with high speech quality is established
(broadband audio).
The time is displayed only if it has been transferred from the system or set by you.
The navigation keys are used to scroll upwards or downwards through selection lists (e.g. phone
book) and the features menu. A selectable entry is highlighted.

SOFTKEY LINE AND IDLE DISPLAY

The three keys below the display are called softkeys. The functions assigned to these keys are
shown in the bottom display line. The key function changes automatically according to the
operating state of the handset.
When the handset is delivered the following symbols are shown in the softkey line:
Enables selection from a list.
Navigation keys: used to call up a selection list with frequently used features.
Phone book on the system (if applicable) or handset
Handset phone book (personal phone book)
Information lists (call list, voice box*, redial) or the programmed function
Profiles or the programmed function
These functions are also assigned to the navigation keys.
Use this option to access the main phone menu.
Note: The functions of the left and middle softkeys and of the left/right navigation keys
are programmable and therefore may subsequently be assigned to different functions.

LED

The LED (3-colour/red-orange-green) in the upper corner signals specific events. These events
are required by the system and cannot be changed or turned on/off (see "Settings menu" on
page 58).
COLOUR STATUS
Green Flashes quickly
Flashes slowly
Lights
Lights
18
DESCRIPTION
Incoming call
Ready indicator / Within range / Not in the
charger cradle
Hands-free operation switched on
Battery full charged (if in the charger cradle)
SWITCH ON/OFF?
Yes
Yes
Yes
Yes