Special Key (Hotkey) /Vip List (Not Mitel 610D, 612D); Vip List (Mitel 610D, 612D); Profiles - Mitel 600 Series User Manual

Answering a call on the headset:
During a call on the DECT phone: Press the Connect key on the headset.
Transferring a call on the DECT phone:
During a call on the headset: Press >>> and select Transfer BT to handset.
For details about additional headset functions, refer to the headset's user guide.
Note: If Bluetooth has been programmed on one of the keys, pressing the programmed
key results in the following actions.
• DECT phone in idle state: Displays the Bluetooth menu.
• During a call on the DECT phone: Transfers the connection to the headset or back to
the DECT phone.
• If a Bluetooth connection is interrupted because you have exceeded its operating range,
you can restore the connection by switching the headset off and back on again (when
you are back within range).

SPECIAL KEY (HOTKEY) /VIP LIST (NOT MITEL 610D, 612D)

By default, the special key (hotkey) at the top right of the DECT phone is programmed as a VIP
phone book/VIP list for saving up to six telephone numbers for quick access. You can reprogram
the key to assign a different function to it.
To program your favourite call numbers:
1. Briefly press the hotkey and select <New Entry>.
2. Enter the name and the call number.
To dial favourite call numbers:
1. Briefly press the hotkey, select the desired entry and press the Call key
The number is dialled.
Calls from call numbers on the VIP list are indicated using the VIP ring tone. The relevant setting
is in the >>> > Audio > Volume settings / Melodies menu.
Note: You can also program the VIP list with phone numbers using the Directories menu
(see "VIP list" on page

VIP LIST (MITEL 610D, 612D)

The programmable keys on the Mitel 610d, 612d can also be assigned with a VIP phone book.
To do so, program one of these keys as described on
the name and phone number as described in the previous paragraph or in
on page 48,

PROFILES

Profiles consist of a group of DECT phone settings, each assigned to a particular situation or
application. For instance, you can switch from Normal mode of operation (e.g. in the office) to
Loud mode when you enter a different environment (e.g. a factory floor). With the switch, features
48).
"Key programming" on page 68
"Directories menu"
Basic functions
.
and save
31