Mitel 600 Series User Manual page 48

Mitel 600 Series DECT Phone User Guide
If the caller does not answer or is busy, press the R softkey or the green Call key. In the case of
a second connection, the following options are the following options are available:
Close current connection
Press >>> and select Release call.
Press >>> again and select Retrieve.
or ...
Press the R softkey, or the Call key.
Change between connections: Brokering
Press >>> and select Brokering.
or ...
Press the R softkey, or the Call key.
On the Mitel 622d, 632d, 650c with icon menu setting (if the R softkey is not offered),
press the green Call key or the Hold softkey, followed by Brok. (Brokering).
Forward a connection with notification
Press >>> and select Transfer.
or ...
Press the End key.
Initiate a Conference Call
During an inquiry call:
Press >>> again and select 3 party.
Note: You can invite additional subscribers into an active conference call. Press R
and call another subscriber. When the call is answered, press >>> and select 3 party.
Conference calls are only possible when enabled by your system.
42