Ending A Conference And Transferring Remaining Parties; Ending Calls - Mitel MiVoice 6940 User Manual

4. Wait for an answer, consult, and then tap the Join Calls softkey to create the three-way
conference call.
Notes:
1. Tapping the Trade Calls softkey swaps the active call with the other party currently on hold.
2. Tapping the Split softkey splits the conference call by placing all callers on hold except
for the initial caller.
5. Repeat steps 2 to 4 to add additional parties to the conference.
Note: If you want to create a conference call with two parties you are already in calls with (on
different line appearances), tap the Add Held softkey and then tap the applicable Line key with the
held call.

Ending a conference and transferring remaining parties

The Mitel MiVoice 6940 IP phone allows a host to easily leave a conference call without disrupting
the connection of the other remaining parties.
If you are the host of a conference call and want to leave the conference, tap the Leave Call softkey
on the phone. Your phone leaves the conference call but the remaining parties are still connected
together.

Ending calls

To end a call, you first need to connect or reconnect to the call if not already connected (e.g. if your
caller is on hold). With the call connected, place the handset on its cradle, tap the End Call softkey,
or press the
also ends an active call.
(Goodbye) key. Pressing the hookswitch button located on the side of the handset
Handling calls
59