Several Alarm Types Activated Simultaneously; Logged In / Logged Out - Mitel 600 Series User Manual

Alarm auto answer
If this function is activated, a call is answered automatically from any call number during the
pre-alarm.
If the function is deactivated and an incoming or existing call is in progress during the pre-alarm,
the alarm call number is dialled at the end of the pre-alarm.
Regardless of the setting, calls from the alarm number or SOS emergency number are answered
automatically and the pre-alarm is terminated.
Alarm tone
The pre-alarm can be sounded with or without an alarm tone on the DECT phone. If the alarm
tone is activated, the signalling volume increases progressively.
Vibrator
You can set whether the pre-alarm should be made with or without vibrator call (as of Release
4.01).
Repeat alarm
This is the amount of time after which a new pre-alarm is made followed by the dialing of the
alarm call number (for instance because the dialing of the alarm call number was cancelled by
the system).
Hands-free in alarm
You can specify whether the alarm call can be made in hands-free or handset operation. This
setting also applies to the emergency call using the SOS / emergency call key.

SEVERAL ALARM TYPES ACTIVATED SIMULTANEOUSLY

Avoid simultaneously activating the three types of sensor alarm where very short delays and
repeats are set and where the pre-alarm may be deactivated. If there is simultaneous triggering
of the alarm call it may no longer be possible to access the menu (to deactivate an alarm type).
In this situation place the handset in the charger cradle and leave it there to make the setting
changes.

LOGGED IN / LOGGED OUT

With your phone system several users are able to share a phone using different call numbers
(for instance, in shift operation). Each user logs in with a password and is then reachable on his
call number. Then, at the end of his shift, for example, he logs out again and the phone becomes
available for another user to log in.
Logged in / Logged out can also be used if a phone is in constant use and the battery is running
low. In this instance, phone operations can be maintained by logging into a different DECT phone.
Contact your system administrator for full details on the access codes applicable in each case.
Note: Logging in activates any features that may already be enabled (for that call number),
e.g. voice box access and call forwarding. When the user logs out, the caller list, redial
list and message lists stored on the handset are deleted to protect private data. The system
administrator can specify whether or not the local phone book should also be deleted.
Basic functions
35