Reinstalling A Slot Cover - Fujitsu AMILO Operating Instructions Manual

System expansions

Reinstalling a slot cover

For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.
► Place the cover angle at its installation slot over the module slots (1)
and secure it with the screw (2).
► Close the casing (see
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
44
2
1
"Closing the casing", Page
► Push the slot cover into the slot (1).
► Fasten the screw (2) when present.
2
1
35).
AMILO Desktop Operating Manual, edition 3