Removing/Adding An Expansion Slot Cover; Removing And Installing The Additional Adapter Card; Removing Additional Adapter Card; Removing An Expansion Slot Cover - Fujitsu ErgoPro m664 Series Specialist's Handbook

ErgoPro m664-series

Removing/Adding an Expansion Slot Cover

To remove/add the Expansion Slot Cover, do as follows:
1. Remove the System unit cover (see page 1-6)
2. Remove screw that holds the Expansion Slot Cover (A)
3. Pull the Expansion Slot Cover out of the chassis(B).
Picture 13 : Removing an Expansion Slot Cover.

Removing and installing the additional adapter card

To remove the additional adapter card, do as follows:
1. Remove the system unit cover (see page 1-6)
2. Disconnect possible cables from the adapter.
3. Remove screw (A) that holds the adapter card in expansion slot.
4. Pull adapter card from expansion slot with care (B).
Picture 14 : Removing additional adapter card.
Page 1-10
A
B
A
PC Specialist's Handbook
B
Edition 1 - Release 1 - March 1998