Reinstalling A Slot Cover - Fujitsu Esprimo E5 Series Operating Manual

System expansions

Reinstalling a slot cover

Installing the board cage
► Close the retaining mechanism on the board cage (1).
► Insert the board cage into the casing (1).
► Fit the casing cover back onto the casing (see Chapter
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
58
2
1
► Push the slot cover into the slot (1).
► Tighten the screw (2, optional).
2
1
"Reattaching the casing cover.", Page 38).
Fujitsu