Installing And Removing Operator-Controllable Drives (Amilo Desktop L/P); Installing A 5 1 / 4 " Drive - Fujitsu AMILO Operating Instructions Manual

Installing and removing operator-controllable
drives (AMILO Desktop L/P)
A drive with a Serial-ATA interface (SATA) is required to expand your system. You will
therefore require a SATA data cable which is not included in the delivery. Use the
black, angled connector designated on the device for the drive power supply.
The casing can accommodate up to two operator-controllable 5 1/4" drives.
Operator-controllable drives include DVD or CD-ROM drives into which an external data carrier
is inserted. Drives not controlled by the operator include hard disk drives.
Installing a 5
► Open the casing (see
Installing Installing anoperator-controllable
► Remove the front panel from the casing (see
(AMILO Desktop L/P)", Page
► If there is a plate located behind the front panel, remove it with an appropriate screwdriver (1).
► Remove the new drive from the packaging.
► Carry out the required settings on the drive.
AMILO Desktop Operating Manual, edition 3
/ " drive
1
4
"Opening the casing", Page
37).
1
33).
"Removing the front panel
System expansions
45