2200 Installation and Operation Manual
APPENDIX 4: INSTALLATION OF SECONDARY AIR TUBES AND BAFFLE
BAFFLE INSTALLATION
1. Stack the baffle boards (A) on top of the c‐cast boards (B) as shown below.
2. Put them on the horizontal air duct (C). Afterwards, push them towards the bottom and sides
so that they rest on the back of the firebox (D) and on the side air ducts. Install the baffle
support/extension (H) ensuring that it fits between the front risers and hold it in place. Install
the front secondary air tube ensuring air holes face forward. Install the cotter pins as indicated
in the secondary air tubes installation procedure. Installing the front secondary air tube (E) will
stabilize baffle assembly during the next step.
46 _ _____________________________________________________________________________