Installing The Chimney Connector; Installation Of Single Wall Chimney Connector - Osburn 2200 Installation And Operation Manual

2200 Installation and Operation Manual
8.6 INSTALLING THE CHIMNEY CONNECTOR
The chimney connector is the single or double wall pipe installed between the stove flue collar and
the chimney breech. Single wall pipe components are available from most hardware and building
supply stores. These components are not usually tested to a particular standard and certified as
compliant. Therefore, a list of rules found in solid fuel installation codes apply to the installation of
single wall pipe.
Double wall chimney connectors are tested and certified. The rules for double wall pipe are found
in the manufacturer's installation instructions. These rules will be very different than those for
single wall.
8.6.1 INSTALLATION OF SINGLE WALL CHIMNEY CONNECTOR
The chimney connector assembly has been called 'the weak link' in the safety of wood heating
systems because failure to install the connector properly (which has been common in the past) can
result in house fires.
The best flue pipe assembly is one that rises straight up from the stove to the base of the chimney
with no elbows. Straight assemblies are less likely to cause problems like smoke roll‐out when the
door is opened for loading. They are also more stable and easier to maintain than assemblies with
elbows. Horizontal runs of flue pipe should be avoided where possible because they reduce
chimney draft.
_ _____________________________________________________________________________ 3 9