Mahidra TUV 300 Owner's Manual page 92

FEATURES AND CONTROL
The following conditions are to be met for the lamps to switch ON;
• Ignition ON
• Head lamp is ON
• Sharp turn taken
8.5.11 Fog Lamps (if equipped)
Fog lamps are to be used along with the head lamp low beam, to
improve the vision during foggy and misty conditions.
Fog Lamps OFF
Align the inner rotary switch on the lighting control stalk to the fog
lamp off 'O' on the inner fixed stalk as shown to switch OFF the fog
lamps.
Front Fog Lamps ON
8-10
To switch ON the front fog lamps, switch ON the ignition and the
parking lamps. Turn the inner rotary switch on the lighting control
stalk to align to the fog lamp symbol on the inner fixed stalk as
shown.
The front fog lamp indicator in the instrument cluster indicates the
operation status.
8.5.12 Hazard Warning Lamp
U42H17
The hazard warning lamp switch is located above the AC controls
on the instrument panel. Use the hazard warning lamp when your
vehicle is stationary or to warn other road users to be cautious
while passing your vehicle.
Fog lamps will turn ON only if the parking lamp is ON.
U42H16
© Copyright Mahindra & Mahindra Ltd.082015