Head Restraint - Mahidra TUV 300 Owner's Manual

SEATS AND SEAT BELTS
5.1.6 Lumbar Support (if equipped)
Both the front seats are provided with lumbar support. Turn the
lever on the outboard side of the seat back as per requirement to
enable/disable lumbar support.

5.2 Head Restraint

Your vehicle seats are equipped with head restraints which are
vertically adjustable. The purpose of these head restraints is to help
limit head motion in the event of a collision.
5-4
Always align top of the head restraint with the top of your head or
U42E10
as close to it as possible. To raise/lower the head restraint, press
the lock tab and pull/push the restraint up/down.
The head restraint can be pulled out completely by depressing the
locking button while pulling the restraint out. To put it back, align the
head restraint shafts over the holes on the seat top and push the
restraint straight down till you hear the lock click.
Keep the seat back as upright as possible so the headrest is
behind, not beneath, and almost touching your head.
Never drive with the head restraints not properly adjusted,
head restraints removed or inserted in a flipped condition. With
no support behind your head, your neck could be seriously
injured in a collision.
U42E04
© Copyright Mahindra & Mahindra Ltd.082015