Mahidra TUV 300 Owner's Manual page 202

MAINTENANCE
The fluid level in the reservoir should be checked on a level
surface with the engine OFF to prevent injury from moving parts
and to ensure accurate fluid level reading.
Follow the below steps for checking and topping up the power
steering fluid;
Start the engine and let it run until it reaches normal operating
1.
temperature
While the engine idles, turn the steering wheel left and right a
2.
couple of times
Turn the engine OFF
3.
Check the power steering fluid level in the reservoir
4.
The fluid level should be maintained between the
5.
marks on the dipstick, integrated with the cap
'MAX'
14-12
U42P08
14.5.8 Windshield Washer Fluid Top-up
Top up the windshield washer reservoir as and when required. The
fluid reservoir is located on the RHS of the engine bay behind the
head lamp. The reservoir supplies washer fluid to both front and
and
'MIN'
rear (if equipped).
If the fluid is low, add fluid in small amounts, continuously
6.
checking the level until it reaches the correct operating range.
Be sure to put the cap back on the reservoir
With a clean cloth, wipe any spilled fluid from all surfaces
7.
Changing of power steering fluid should always be done by an
Authorized Mahindra Dealer.
U42P09
© Copyright Mahindra & Mahindra Ltd.082015