Driving Your Vehicle - Mahidra TUV 300 Owner's Manual

Table of Contents

Advertisement

STARTING AND DRIVING THE VEHICLE
11.7.10 General AMT Precautions
Ensure the brake pedal is depressed or park brake engaged
while vehicle is stopped with the engine running. This will
prevent the vehicle from moving ahead due to the creep
function.
Ensure park brake engaged while vehicle is stopped with the
engine off.
Any malfunction of the AMT is indicated by the
!
"Transmission
instrument
Mahindra Authorised Dealer for further assistance.
• Never use the accelerator pedal to hold the vehicle on an uphill
slope with the gear in forward ("A" or "M") position
• Do not rev the engine with the gear in "A" or "M" position with
park/foot brake engaged. This will reduce the clutch life.
• Do not leave the vehicle unattended or with children and the
engine running
• Always, put the vehicle in gear, switch off the engine and apply
the park brake before leaving the vehicle
11-14
Malfunction"
lamp
in
cluster.
Contact
your
nearest
• After shifting the automated manual transmission gearshift
lever to the "N" position, always check the gear position
indicator in the instrument cluster shows the "N" position to
make sure that the transmission is disengaged
• If the transmission cannot be put in neutral, turn the key
from the "OFF" to the "ON" position, and move the
automated manual transmission gearshift lever from "N" to
"A/M", or "R", then back to "N" again. Then turn the key from
the "ON" to the "OFF" position
• These procedures may help put the transmission in neutral.
If the transmission still cannot be put in neutral, you cannot
tow the vehicle without using a towing dolly
the

11.8 Driving Your Vehicle

11.8.1 General Driving Precautions
Always observe the following precautions to minimize the risk of
accidents leading to serious personal injury or damage to your
vehicle.
• Before you drive your vehicle, please read this manual carefully.
© Copyright Mahindra & Mahindra Ltd.082015

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents