Mahidra TUV 300 Owner's Manual page 159

Your vehicle is equipped with a creep function. When the gear
mode is in either "A" or "M" positions, and you release your foot
off the brake pedal, the vehicle starts moving without pressing
the accelerator pedal. You can hold the vehicle using the park
brake for momentary stops or shift to "N" mode.
11.7.2 Driving the Vehicle
TUV 3OO autoS HIFT DRIV I NG INFORMATION FROM STATIONARY
START ENGINE
ENG AGE GEAR
BRAKE
STOP & GO
ENGA GE GEAR
Before driving, observe if any warning lamps are ON in the
cluster. If yes, follow the appropriate checks given in the
"Warning Lamps Overview" section of the Owner's Manual.
Ensure there are no warning lamps ON in the cluster
1.
© Copyright Mahindra & Mahindra Ltd. 082015
N
BRAKE
A/ M R
( (
OR
Hand Brake
ACCELERATOR
U42L13
Idling for a few seconds
2.
Press the brake pedal
3.
Shift the gear shift lever to "A/M" once for auto mode and
4.
repeat it once again to Manual/Mountain mode.
Select '+ or —shift' shifting to Manual/Mountain mode
5.
Release the parking brake
6.
Release the service brake pedal
7.
The vehicle starts to move with the help of the "creep" function
8.
Slowly accelerate to drive away
9.
While starting on an incline;
• Start the engine as per the "Starting the Engine" procedure
• Shift to "A" or "M"
• Release the service brake pedal
• Slowly accelerate and simultaneously release the park brake
11.7.3 "N" Mode
When the "N" mode is selected, the vehicle is in "Neutral". This
mode can be used for stopping at traffic signals or for momentary
stops along with brake pedal depressed or park brake engaged.
STARTING AND DRIVING THE VEHICLE
11-9